Your options for solid slope stabilization.

ECORASTER – the stabilization system for sloped surfaces.

Our S50 ground grid is ideal for securing sloped surfaces, such as work paths or access roads on slopes. When used in combination with the appropriate ground anchors, surfaces can be securely and firmly anchored to the slope. With over 200 expansion joints per square meter and 36 connecting elements per square meter, the S50 counteracts the forces acting on the slope and provides long-lasting stability. This reduces the removal of topsoil and damage to the soil surface.

Removal of topsoil, destruction of the soil surface through, for example, gully-like depressions, nutrient discharge and linear erosion caused by water run-off are reduced.

To the ECORASTER product overview

S50 + custom-fit accessories
= reliable slope stabilization

By combining the ECORASTER S50, flexible curve pieces, or precisely fitting universal angle elements, the surfaces can be adapted to the terrain without disrupting the stable composite structure. Like chain mail, the ECORASTER can be laid on embankments, slopes, and inclines, providing the necessary support for vegetation. Ideal for rainwater retention basins and all forms of slope stabilization.

Grafische Darstellung eines Querschnitt einer ECORASTER Fläche mit Erdnägeln in der Schräge

Installation on a slope

Depending on requirements and application, a sufficiently thick subbase should be applied to the prepared subgrade as a load-bearing or leveling layer. The finished grid panels are filled with suitable topsoil material or a mixture of sand with topsoil, humus, and, for example, substrate containing starter fertilizer for greening, to a height of 5 cm (top edge of grid). The subbase and backfill material should have a low proportion of fine material in order to achieve a certain water storage capacity for greening and to ensure water permeability.

Please also see our installation instructions for slopes!